AMGO 10,000 lb 2-Post Lift - Extra Tall | OHX-10H

BY AMGO
SKU OHX-10H
Save $500.00 $4,750.00 USD$4,250.00 USD
No Sales Tax in Most States
Free Warehouse Pickup Available
Official Factory Warranty
Free Warehouse Pickup
Jump to:

Why the AMGO OHX-10H 2 Post Lift Is the Perfect Fit for Taller Bays

Buying a lift can feel risky when you are worried about ceiling height, door swing, and whether the arms will actually reach your lift points. If you run a busy shop, you also need fast rise times, predictable safety locks, and real under-car clearance for tall vans and trucks. The AMGO OHX-10H answers those pain points with extra-tall columns, two factory height settings, and a clear-floor design that keeps your bay open. With a 10,000 lb capacity, 3 9/16' minimum pad height, and roughly 81' to 83 5/8' of lifting height with adapters, it is built for work. If you are searching for a dependable 2 Post Lift, this model is a smart, future-proof pick for commercial bays. Above 9,000 lbs the field thins quickly, and most 10K overhead lifts come with a single fixed column height. If your bay has a 13 to 15 foot ceiling and you mostly work on lifted trucks or full-size SUVs, the standard 9-10 foot column heights leave you with vehicles bumping the lift's overhead beam.

This OHX-10H gives you room to breathe under the vehicle without stretching your building limits. Overall height is selectable at 157' or 167 3/16', and you can widen the stance to increase the drive-thru clearance from 99 13/16' up to 105 11/16' with the width kit. The direct-drive hydraulic system keeps lifts smooth and maintenance simple, while single-point manual lock release saves steps. UHMW polyethylene sliders and extra-long carriages keep motion tight and controlled over years of use. Pair that with automatic arm restraints and an overhead shut-off and you get confidence on every cycle. Two factory-set column heights (157' or 167-3/16') let you size the lift to your actual ceiling, plus an optional wide-kit upgrade for door-clearance flexibility. The 2.0 HP power unit delivers consistent cycle times across the full 10K capacity.

Set-up is straightforward as long as you plan ahead. You will need 220V single-phase power with proper grounding, a level 4' slab at 3,000 psi, and a ceiling of at least 157' for the low column setting. Width between columns is 112 1/4' (up to 118 1/2' with the optional width extension kit), so mirrors and door clearance are easy to plan around. As part of the AMGO 2 post lifts lineup, the OHX-10H ships with stackable pad adapters, toe guards, and tool trays, and you can add 6' height adapters or extension kits as your vehicle mix evolves. For shops working on lifted trucks, full-size SUVs, or anywhere ceiling height varies bay-to-bay, the OHX-10H is one of the rare 10K lifts with built-in height flexibility instead of forcing a permanent decision at install.

Need a different capacity or configuration? Compare all 2 post car lifts, browse the full Car Lifts collection, or read our 2-Post vs 4-Post guide to pick the right style. Questions? Call Support Desk.

AMGO OHX-10H extra tall two post lift, 10k capacity

Benefits of the AMGO OHX-10H Two Post Lift

Extra under-car clearance
Two column-height settings (157' or 167-3/16') give you under-vehicle headroom that fixed-height 10K lifts can't match. Stand fully upright for service work, even on tall lifted trucks.
Faster daily throughput
Single-point lock release engages and disengages from one location. Quick cycle times mean less waiting between vehicles in a busy commercial bay.
Better door clearance
Optional wide-kit upgrade gives extra space for door swing during service work. Less risk of door-edge damage and faster tech access in tight bays.
Open bay floor
Overhead crossmember keeps cables and hoses routed above the working area. Drive in, lift, work without stepping over floor-routed lines.
Low maintenance system
Direct-drive hydraulic cylinders and self-equalizing cables reduce the routine maintenance schedule. Fewer moving parts, fewer service intervals.
Future-proof width options
Wide-kit upgrade lets you adapt the lift to changing fleet mixes without buying a replacement lift. Sized for today, ready for tomorrow.

Key Features of the AMGO OHX-10H 2-Post Lift You'll Love:

• Direct-Drive Dual Hydraulic Cylinders: AMGO uses dual direct-drive cylinders to reduce the number of wear parts compared to chain or screw systems. The result is smoother, more consistent lifting with less maintenance over time. Your techs get predictable cycles and you get lower lifetime cost.

• Super-Asymmetric, Multi-Stage Arms: Load vehicles symmetrically or asymmetrically to balance door clearance and reach. Multi-stage arms make it easier to hit lift points on everything from sedans to short-bed trucks. This versatility is what most buyers want in a 10000 lb 2 post lift.

• Single-Point Manual Lock Release: Unlock both columns from one side to speed up lowers and reduce walking around the bay. It is a small feature that saves seconds on every job, which adds up across a full day. Fewer steps also means a safer, more controlled workflow.

• Width and Height Expansion Options: Add width-extension or height-extension kits if your vehicle mix changes or you move spaces. Increasing drive-thru to 105 11/16' can make all the difference for mirror clearance on wider trucks. Optional 6' height adapters help you fine-tune underbody access on taller frames.

AMGO OHX-10H measurements Chart

Minimum Garage Requirements

✓ Ceiling Height: At least 173' (14'5') recommended ✓ Footprint: 99' drive-thru x 134' overall (8'3' x 11'2') ✓ Concrete Thickness: Minimum 4' (101.6 mm) ✓ Concrete Strength: Minimum 3,000 PSI compressive ✓ Electrical: 2.0 HP ✓ Overall Lift Height: 167' (13'11') (measure before ordering)

✓ Ceiling Height: At least 173' (14'5') recommended
✓ Footprint: 99' drive-thru x 134' overall (8'3' x 11'2')
✓ Concrete Thickness: Minimum 4' (101.6 mm)
✓ Concrete Strength: Minimum 3,000 PSI compressive
✓ Electrical: 2.0 HP
✓ Overall Lift Height: 167' (13'11') (measure before ordering)

*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering. Note: 2-post overhead lifts inherently require tall ceilings. Verify your overhead clearance before ordering.

AMGO OHX-10H 10,000 lb 2-Post Car Lift Specifications

Manufacturer AMGO
Model OHX-10H
Lift Type Extra tall 2-post, clear-floor, overhead cut-off
Capacity 10,000 lbs
Lift Time ~63 seconds
Max Lifting Height (w/o adapters) 78 3/4'-80 5/8'
Max Lifting Height (with adapters) 81 3/4'-83 5/8'
Max Lock Height (w/o adapters) 77 3/16'-79 1/16'
Max Lock Height (with adapters) 80 3/16'-82 1/16'
Overall Height (2 settings) 157' or 167 3/16'
Overall Width 134 15/16'
Drive-Thru Clearance 99 13/16'
Width Between Columns 112 1/4'
Minimum Pad Height 3 9/16'
Power 220V, 60 Hz, 1-phase
Motor 2.0 HP
Hydraulic System Dual, direct-drive cylinders
Carriages Extra-long with UHMW polyethylene sliders
Safety Single-point manual lock release, automatic arm restraints, overhead shut-off, aero sync cables
Included Accessories Stackable pad adapters, tool trays, detachable toe guards, double-screw rubber pads with 3' extensions (pin Ø 1/2')
Optional Kits 6' height adapters, width-extension kit, height-extension kit (varies by model)
Concrete Requirement 4' minimum thickness, 3,000 psi, level; do not install on asphalt
Ceiling Requirement ≥ 157' for OHX-10H (plan for 167 3/16' on the high setting)
Shipping Weight ~1,739 lbs
Warranty Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years
Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years
Other Parts (excl. Consumables), electrical, power units: 2 Years

AMGO OHX-10H Frequently Asked Questions

Who needs the extra-tall OHX-10H?

Shops lifting vans, lifted trucks, and tall SUVs. The columns install at 157' or 167-3/16', allowing 80-5/8' of lifting height (83-5/8' with adapters) so tall vehicles rise to full working height without hitting the overhead cut-off early. The standard OHX-10 covers normal-height vehicles for less.

Will my truck fit on the OHX-10H?

A 10,000 lb 2 post lift covers sedans through 3/4-ton pickups. Width field-sets from 134-15/16' to 140-7/8' (add the width extension kit for the widest stance), with a drive-thru up to 105-11/16'. Frame-rail vehicle? Add the frame cradle pads.

How much ceiling height do I need?

Plan on 173' (14'5') at the tall setting -- this is a high-bay lift by design. At the 157' setting, 163' (13'7') works.

Which AMGO 2-post is right for me?

This OHX-10H is the tall-vehicle specialist. Standard bay? The OHX-10 is the same adjustable-width lift at 144' tall. Heavier vans and trucks? The OH-12 carries 12,000 lbs with height settings to 198'.

Do I need to bolt it to the floor?

Yes -- every 2-post must be anchored. Plan on concrete at least 4' thick at 3,000 PSI compressive strength, and verify your slab before ordering.

Should I get a 2-post or a 4-post lift?

Two-posts like this one are built for repair work -- wheels hang free for brakes, suspension, and tires. Four-posts win for storage and drive-on ease. Our 2-Post vs 4-Post guide walks through the decision in five minutes.

Is the AMGO OHX-10H worth it?

Extra lifting height is the one thing you can't add to a standard lift later -- the OHX-10H builds it in, backed by AMGO's 5-year structure / 3-year hydraulics / 2-year electrical warranty. See the Reviews tab above for buyer feedback.

Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.

Recommended Concrete Slab & Electrical Setup

Verify your shop bay dimensions before installation. Contact our lift specialists at contact@garageequippro.shop with any questions.

Concrete Slab Depth

9K–11K lb lifts typically require 4″–5.9″ of 3,000 PSI cured concrete (28+ days cure on new pours). Heavy-duty 12K–16K lb models require 5″–6″ depth.

Electrical Supply

Most 2-post lifts and commercial 4-post lifts use a dedicated 220V single-phase 30A circuit breaker. Select 8,500 lb & 9,500 lb 4-post storage lifts offer 110V options.

Ceiling Clearance

Measure from the garage slab to your lowest overhead obstruction (door opener, tracks, or beam) and compare against the Overall Height in the Specifications table.

Fast Nationwide LTL Freight & Free U.S. Warehouse Pickup

Every order dispatches from the U.S. distribution hub closest to your ZIP code with full Bill of Lading tracking.

42+ Free Warehouse Pickups

Pick up your crated lift for FREE across IA, IL, TX, CA, GA, NJ, FL, OH, UT, WA, NC, CO, AZ, and more. Warehouse staff load your trailer or pickup bed via forklift at $0 cost.

Commercial Business Delivery

Direct LTL freight delivery to any commercial shop or business address equipped with an on-site forklift or loading dock.

Residential Freight

Scheduled LTL delivery with carrier call-ahead appointment. Coordinate a local rollback tow truck, tractor/forklift, or regional terminal pickup for smooth unloading.

100% Authorized U.S. Factory Warranty

Official Factory-Authorized Dealer

Garage Equip Pro (garageequippro.shop) is an official factory-authorized U.S. dealer for AMGO. Every serial-numbered vehicle lift includes full manufacturer structural and hydraulic cylinder/power-unit warranty coverage plus lifetime U.S. technical support at contact@garageequippro.shop.

NO SALES TAX IN MOST STATES

No sales tax on most U.S. orders

DEDICATED SUPPORT

Daily assistance at contact@garageequippro.shop

LIFETIME SUPPORT

Peace of mind with lifetime U.S. lift support

800+ REVIEWS

Highly rated & shop-approved. View all!