AMGO 10,000 lb 2-Post Lift - Symmetric | BP-10
How the AMGO BP-10 2 Post Lift Combines Strength, Safety, and Smart Design
Buying a lift can feel risky when youβre not sure it will fit your bay, reach your lift points, or meet safety standards day after day. The AMGO BP-10 solves those pain points with a base-plate design that fits modest ceilings and a symmetric layout that keeps vehicles balanced and easy to position. With a 10,000 lb rating and all four 3-stage retractable arms, it handles sedans, SUVs, and light trucks without drama. A low 3-9/16' pad height makes spotting simple and reduces ramp block hassles. If youβve been searching for a reliable 2 Post Lift that wonβt fight your space, this oneβs built for real shops. And once you start filtering for 10K capacity AND baseplate (no overhead beam), the field shrinks to just a few options. Most 10K lifts default to overhead because that's easier to engineer, but residential garages can't accommodate the 12-13 foot ceilings overheads need.
Ceiling height worries are common, especially in mixed-use bays. The BP-10βs overall height is 111-7/8', which works in many standard garages while keeping service comfort high. The 100-13/16' drive-thru clearance and 112-3/16' between columns give generous door swing and spotting room. Dual cylinders with chain equalization and aero sync cables keep lifts level so youβre not chasing arms during setups. Expect a brisk β62 second rise and a smooth descent with a single-point lock release. 111-7/8' overall height fits a standard residential 9-10 foot ceiling without forcing modification. Symmetric arm geometry handles full-size trucks and SUVs at 100-13/16' drive-thru width.
Durability and uptime matter more than spec sheets alone. UHMW self-lubricating sliders cut friction and wear in the carriages, while imported hydraulic seals help the system hold pressure under daily use. Automatic arm restraints engage as you lift, and a dual-safety lock structure provides redundant protection at work height. Power is straightforward with a 2.0 HP single-phase 220V motor, and ISO 46 hydraulic oil is recommended for clean, consistent operation. If you need a symmetric car lift that works hard without fuss, AMGOβs BP-10 is a smart long-term pick for any shop. For home-shop owners or commercial bays with limited ceiling height, the BP-10 brings true 10K capacity into a footprint and clearance profile that residential garages can actually use.
Need a different capacity or configuration? Compare all 2 post car lifts, browse the full Car Lifts collection, or read our 2-Post vs 4-Post guide to pick the right style. Questions? Call Support Desk.

Benefits of the AMGO BP-10 Two Post Lift
Key Features of the AMGO BP-10 2-Post Lift You'll Love:
β’ 10,000 lb symmetric capacity with 3-stage arms: This 10000 lb 2 post lift is built for daily use on sedans, SUVs, and light trucks. All four arms are 3-stage and retractable, so you can reach short and long lift points without awkward spotting. The symmetric layout centers mass between columns, improving balance and door clearance while you set adapters.
β’ Dual cylinders, chain drive, and aero sync cables: Paired cylinders and chain equalization deliver steady rise and level platforms across the entire stroke. Aero sync cables help maintain column-to-column harmony, reducing re-leveling time. Imported seals keep the hydraulics tight, supporting long service intervals and consistent performance.
β’ Dual-safety locks with single-point release: A mechanical lock system engages at multiple positions as you rise, giving you a solid work height. The single-point manual release lets you control descent from one column, saving time during turnarounds. Automatic arm restraints lock as the lift leaves the ground, so arms stay put during work.
β’ Shop-ready power and straightforward maintenance: The 2.0 HP single-phase 220V motor is easy for a licensed electrician to install and ground correctly. Use ISO 46 oil for reliable operation, then change it after the first three months and yearly thereafter. Quick daily checks of anchor torque, hoses, cable tension, and lock function keep uptime high.

Minimum Garage Requirements
✓ Ceiling Height: At least 117' (9'9') recommended ✓ Footprint: 100' drive-thru x 139' overall (8'4' x 11'7') ✓ Concrete Thickness: Minimum 4' (101.6 mm) ✓ Concrete Strength: Minimum 3,000 PSI compressive ✓ Electrical: 2.0 HP, single-phase, 220V, 60 Hz ✓ Overall Lift Height: 111' (9'3') (measure before ordering)
✓ Ceiling Height: At least 117' (9'9') recommended
✓ Footprint: 100' drive-thru x 139' overall (8'4' x 11'7')
✓ Concrete Thickness: Minimum 4' (101.6 mm)
✓ Concrete Strength: Minimum 3,000 PSI compressive
✓ Electrical: 2.0 HP, single-phase, 220V, 60 Hz
✓ Overall Lift Height: 111' (9'3') (measure before ordering)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering.
AMGO BP-10 10,000 lb 2-Post Car Lift Specifications | |
| Manufacturer | AMGO |
| Model | BP-10 |
| Lift Type | Symmetric 2-post, base-plate (floor-plate) |
| Rated Capacity | 10,000 lb |
| Arm Configuration | Four 3-stage retractable arms, automatic arm restraints |
| Lifting Time | β 62 seconds |
| Minimum Pad Height | 3-9/16' |
| Max Lifting Height (pads only) | 76-3/8' to 78-1/4' |
| Max Lifting Height (with extensions) | 79-3/8' to 81-1/4' |
| Max Lock Height (pads only) | 74-13/16' to 76-11/16' |
| Max Lock Height (with extensions) | 77-13/16' to 79-11/16' |
| Overall Height | 111-7/8' |
| Overall Width | 139-1/8' (standard) / 145-1/16' (wide-stance configuration) |
| Width Between Columns | 112-3/16' (standard) / 118-1/8' (wide-stance configuration) |
| Drive-Thru Clearance | 100-13/16' (standard) / 106-11/16' (wide-stance configuration) |
| Power Unit | 2.0 HP, single-phase, 220V, 60 Hz |
| Hydraulic System | Dual cylinders, chain drive, aero sync cables |
| Weight | 1,697 lbs |
| Sliders | UHMW self-lubricating |
| Safety System | Dual-safety lock structure, single-point manual lock release |
| Included Pads | Double-screw rubber pads, 1/2' pin |
| Included Extensions | (4) 3' pad extensions |
| Optional Accessories | 6' pad extensions, saddle adapters, base-plate extension kit |
| Concrete Requirement | 4' thick, 3,000 PSI, sound condition, no rebar in anchor zone |
| Anchor Torque | 150 NΒ·m |
| Shipping Dimensions | Length: 114 1/8' Width: 20 1/8' Height: 35 1/2' |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
AMGO BP-10 Frequently Asked Questions
Will my truck fit on the BP-10?
A 10,000 lb 2 post lift with four 3-stage retractable arms covers sedans, SUVs, half-tons, and most 3/4-ton pickups. The 100-13/16' drive-thru and 112-3/16' between columns take full-size trucks, with lifting height up to 78-1/4' (81-1/4' with extensions). An optional wide-stance configuration extends drive-thru to 106-11/16' for wider fitments.
How does a 10K lift fit under a 10-foot ceiling?
The base-plate design: hydraulics run through a low floor plate instead of an overhead beam, keeping the columns at 111-7/8'. Plan on 117' (9'9') of ceiling -- most clear-floor 10K lifts need 12 feet or more.
Which AMGO 2-post is right for me?
This BP-10 is the low-ceiling 10K. Mostly cars and half-tons? The BP-9X saves money. Need 12,000 lbs? The BP-12 is the heavy floor-plate option. Want ALI certification and a clear floor? The OH-10 carries the gold label.
What accessories should I consider?
The frame cradle pads for frame-rail trucks and the baseplate extension kit for a wider stance are the two AMGO lists for this lift.
Do I need to bolt it to the floor?
Yes -- every 2-post must be anchored. Plan on concrete at least 4' thick at 3,000 PSI compressive strength, and verify your slab before ordering.
Should I get a 2-post or a 4-post lift?
Two-posts like this one are built for repair work -- wheels hang free for brakes, suspension, and tires. Four-posts win for storage and drive-on ease. Our 2-Post vs 4-Post guide walks through the decision in five minutes.
Is the AMGO BP-10 worth it?
Ten thousand pounds of symmetric capacity under a 10-foot ceiling with AMGO's 5-year structure / 3-year hydraulics / 2-year electrical warranty. See the Reviews tab above for buyer feedback.
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
Recommended Concrete Slab & Electrical Setup
Verify your shop bay dimensions before installation. Contact our lift specialists at contact@garageequippro.shop with any questions.
Concrete Slab Depth
9K–11K lb lifts typically require 4″–5.9″ of 3,000 PSI cured concrete (28+ days cure on new pours). Heavy-duty 12K–16K lb models require 5″–6″ depth.
Electrical Supply
Most 2-post lifts and commercial 4-post lifts use a dedicated 220V single-phase 30A circuit breaker. Select 8,500 lb & 9,500 lb 4-post storage lifts offer 110V options.
Ceiling Clearance
Measure from the garage slab to your lowest overhead obstruction (door opener, tracks, or beam) and compare against the Overall Height in the Specifications table.
Fast Nationwide LTL Freight & Free U.S. Warehouse Pickup
Every order dispatches from the U.S. distribution hub closest to your ZIP code with full Bill of Lading tracking.
42+ Free Warehouse Pickups
Pick up your crated lift for FREE across IA, IL, TX, CA, GA, NJ, FL, OH, UT, WA, NC, CO, AZ, and more. Warehouse staff load your trailer or pickup bed via forklift at $0 cost.
Commercial Business Delivery
Direct LTL freight delivery to any commercial shop or business address equipped with an on-site forklift or loading dock.
Residential Freight
Scheduled LTL delivery with carrier call-ahead appointment. Coordinate a local rollback tow truck, tractor/forklift, or regional terminal pickup for smooth unloading.
100% Authorized U.S. Factory Warranty
Official Factory-Authorized Dealer
Garage Equip Pro (garageequippro.shop) is an official factory-authorized U.S. dealer for AMGO. Every serial-numbered vehicle lift includes full manufacturer structural and hydraulic cylinder/power-unit warranty coverage plus lifetime U.S. technical support at contact@garageequippro.shop.

NO SALES TAX IN MOST STATES
No sales tax on most U.S. orders
DEDICATED SUPPORT
Daily assistance at contact@garageequippro.shop
LIFETIME SUPPORT
Peace of mind with lifetime U.S. lift support
800+ REVIEWS
Highly rated & shop-approved. View all!
Why Buy from Garage Equip Pro
Six reasons home garages and pro shops nationwide trust us with their lift purchases.
Authorized U.S. Dealer
Full manufacturer warranty on every order: AMGO, Katool, Triumph, Atlas, Tuxedo, Daytona, iDEAL, and Launch.
Best Price Guarantee
Find a lower advertised price from another authorized U.S. dealer? We'll match it, no questions asked.
0% APR Financing Available
Spread the cost over monthly installments without paying interest for qualified buyers at checkout.
Save 3% with Wire Transfer
Pay by bank wire or ACH transfer and we'll knock 3% off the order total. Most popular for lifts over $2,000.
Veterans, First Responders & Pro Shops
Special pricing for active duty, veterans, police, fire, EMS, and multi-lift commercial shop installations.
42+ Free Warehouse Pickups
Skip residential freight fees by picking up at one of our 42+ regional U.S. warehouse locations nationwide.
Still have questions? Talk to a real lift expert.
Contact Our Lift ExpertsWe're available every day from 8 AM to 8 PM ET. No-pressure advice, real expertise.