Daytona LFPA24 24,000 lb Four Post Alignment Lift
Align Anything That Rolls In: the Daytona LFPA24 24,000 lb Four Post Alignment Lift
Alignment is the one service a fleet account will not send anywhere else once you can do it. The problem is that most alignment racks top out around 12,000 or 14,000 lbs, which is fine until the customer's box trucks, shuttle buses, ambulances, and loaded duallys need doing. Then the work you built the rack for goes to whoever has the bigger one, and it takes the rest of the account with it.
The Daytona LFPA24 is that bigger one. 24,000 lbs of capacity on 284.6' runways, driven by a heavy-duty 5' cylinder and aircraft quality lifting cables. Rise runs 10.2' to 66.9', so a technician stands and works rather than crouching. Overall footprint is 330.5' by 155.1', which is real commercial floor space, and the payoff is that essentially nothing in a light or medium duty fleet is too heavy for it.
The alignment hardware is included, not extra. Built-in slip plates and adjustable turntables both ship standard, which on most competitor racks is a line item that adds real money. The ladder lock system has manual release with locking positions every 3.5', and the whole thing runs on 240V single phase at 4 HP and 15 amps.
This is a floor plan decision as much as an equipment one. Call a Garage Equip Pro lift specialist before you commit the bay, and we will work through the footprint, the slab, and whether you need the rolling jacks and alignment computer at the same time. Both are sold separately. Compare every 4 post car lift, see all alignment lifts, browse rolling bridge jacks, or view the full Daytona lineup.

Benefits of the Daytona LFPA24
Key Features of the Daytona LFPA24 24k Alignment Lift
• 24,000 lb lifting capacity: Driven by a heavy-duty 5' cylinder with aircraft quality lifting cables. Rise range is 10.2' to 66.9', and the four column design puts nothing overhead and nothing between the runways.
• Built-in slip plates, standard: Rear slip plates are part of the runway rather than an accessory, which is what lets you take a toe reading without fighting the suspension.
• Adjustable turntables, standard: Front turntables ship with the lift and adjust for wheelbase, so the rack is ready to align on the day it is commissioned.
• Ladder lock system: Manual release with locking positions every 3.5' through the travel. Simple, visible, and mechanically obvious, which is what you want holding 24,000 lbs over a technician.
• Runway and footprint: Runways measure 25.6' wide by 284.6' long with 43.7' of open space between them, giving 94.9' outside to outside. Overall the lift occupies 330.5' by 155.1' and stands 87.9' tall at full height.
• Rolling jack ready: Daytona's drawing shows a rolling jack on this lift with its arms spanning 35.4' to 63.0' pad to pad; add a rolling bridge jack for wheel-free service. Jacks and the alignment computer are sold separately, so you can phase the investment.
Minimum Garage Requirements
✓ Floor Space: 30'-0' L x 15'-0' W recommended (lift occupies 330.5' x 155.1') ✓ Ceiling Height: Determined by your tallest vehicle plus 66.9' of rise, not by the lift ✓ Concrete Thickness: Not published by Daytona for this model; confirm with Daytona before ordering
✓ Concrete Strength: Not published by Daytona for this model; confirm with Daytona before ordering ✓ Floor Level: Within 3/8' across the installation area ✓ Electrical: 240V single phase, 4 HP, 15A, 60Hz dedicated circuit
✓ Floor Space: 30'-0' L x 15'-0' W recommended (330.5' x 155.1')
✓ Ceiling Height: Tallest vehicle plus 66.9' of rise
✓ Concrete Thickness: Not published by Daytona for this model; confirm with Daytona before ordering
✓ Concrete Strength: Not published by Daytona for this model; confirm with Daytona before ordering
✓ Floor Level: Within 3/8' across the installation area
✓ Electrical: 240V single phase, 4 HP, 15A, 60Hz dedicated circuit
*Daytona does not publish a concrete thickness or strength for this lift; confirm the requirement with Daytona in writing before ordering. Installing on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation.
| Daytona LFPA24 24,000 lb 4-Post Alignment Lift Specifications | |
| Manufacturer | Daytona |
| Model | LFPA24 |
| Lift Type | 4-Post Alignment Lift |
| Lifting Capacity | 24,000 lbs (10,886 kg) |
| Rise Range | 10.2' to 66.9' (260 to 1,700 mm) |
| Overall Length | 330.5' (8,394 mm) including ramps |
| Overall Width | 155.1' (3,939 mm) |
| Overall Height | 87.9' (2,232 mm) at the top of the columns |
| Runway Length | 284.6' (7,230 mm) |
| Runway Width | 25.6' each (650 mm) |
| Inner Width Between Runways | 43.7' (1,110 mm) |
| Runway Center to Center | 69.3' (1,760 mm) |
| Outer Runway Span | 94.9' (2,410 mm) |
| Ramp Length | 53.2' (1,350 mm) |
| Rolling Jack Arm Span, Pad to Pad (Daytona drawing) | 35.4' to 63.0' (900 to 1,600 mm) |
| Lock System | Ladder lock with manual release, positions every 3.5' |
| Cylinder | Heavy-duty 5' with aircraft quality lifting cables |
| Power Requirement | 240V / 4 HP / 15A / 1PH / 60Hz |
| Concrete Requirement | Not published by Daytona for this model; confirm with Daytona before ordering |
| Finish | Industrial grade matted powder coat, dark grey |
| Shipping Dimensions | 278' x 33' x 65' | 7,800 lbs |
| Included Accessories | Built-in slip plates and adjustable turntables |
| Sold Separately | Rolling jacks and wheel alignment computer |
| Warranty | 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts |
| Blueprint | View the engineer stamped dimensional drawing |
Daytona LFPA24 Frequently Asked Questions
How much floor space do I actually need?
The lift itself occupies 330.5' by 155.1', which is about 27'-6' by 12'-11'. Plan on a 30 by 15 foot bay so there is room to walk both sides, open doors, and get the alignment computer positioned. Ceiling height is set by your tallest vehicle plus 66.9' of rise, not by the lift, since a four post rack has nothing overhead.
Are the slip plates and turntables really included?
Yes, both are standard. This is worth checking carefully when you compare quotes, because on a number of competing alignment racks the slip plates, the turntables, or both are priced as accessories. A rack that looks cheaper on the headline can land higher once the alignment hardware is added.
What else do I need to actually perform alignments?
A wheel alignment computer, which is sold separately. Most shops also add a rolling bridge jack so wheels can come off without leaving the rack. Daytona's drawing shows the rolling jack on this lift with its arms spanning 35.4' to 63.0' pad to pad. Call us and we will spec the jack to match.
Do I need 24,000 lbs, or would 14,000 do?
If your alignment work is cars, pickups, and vans, the LFPA14 covers it and costs considerably less. You want 24,000 when medium duty is in the mix: box trucks, shuttle buses, ambulances, larger chassis cabs, and loaded commercial upfits. The honest test is whether turning that work away is costing you an account rather than a single job.
What concrete does it need?
Daytona does not publish a concrete thickness or strength for this lift, so get the requirement from Daytona in writing before you order. Verifying concrete is the customer's responsibility, and installing on an inadequate slab is genuinely dangerous.
Does a lift this size need three phase power?
No. It runs on 240V single phase, 4 HP, 15 amps, 60Hz on a dedicated circuit. That is worth knowing at 24,000 lbs, because plenty of equipment in this class assumes three phase service. Have a licensed electrician confirm the circuit and breaker sizing before the installer arrives.
How does delivery work on something this big?
The LFPA24 ships as freight in a 278' x 33' x 65' crate weighing 7,800 lbs. That is close to four tons and over 23 feet long, so this is not a tailgate delivery. You will need a forklift with adequate capacity and clear access on site. Talk to a lift specialist before ordering so the delivery is planned rather than improvised.
What is the warranty?
Five years structural, two years on power units, cylinders, and seal kits, and one year on all other defective parts. Daytona has served shops in the United States and Canada since 1999 and stocks parts in regional warehouses.
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
Manuals
Recommended Concrete Slab & Electrical Setup
Verify your shop bay dimensions before installation. Contact our lift specialists at contact@garageequippro.shop with any questions.
Concrete Slab Depth
9K–11K lb lifts typically require 4″–5.9″ of 3,000 PSI cured concrete (28+ days cure on new pours). Heavy-duty 12K–16K lb models require 5″–6″ depth.
Electrical Supply
Most 2-post lifts and commercial 4-post lifts use a dedicated 220V single-phase 30A circuit breaker. Select 8,500 lb & 9,500 lb 4-post storage lifts offer 110V options.
Ceiling Clearance
Measure from the garage slab to your lowest overhead obstruction (door opener, tracks, or beam) and compare against the Overall Height in the Specifications table.
Fast Nationwide LTL Freight & Free U.S. Warehouse Pickup
Every order dispatches from the U.S. distribution hub closest to your ZIP code with full Bill of Lading tracking.
42+ Free Warehouse Pickups
Pick up your crated lift for FREE across IA, IL, TX, CA, GA, NJ, FL, OH, UT, WA, NC, CO, AZ, and more. Warehouse staff load your trailer or pickup bed via forklift at $0 cost.
Commercial Business Delivery
Direct LTL freight delivery to any commercial shop or business address equipped with an on-site forklift or loading dock.
Residential Freight
Scheduled LTL delivery with carrier call-ahead appointment. Coordinate a local rollback tow truck, tractor/forklift, or regional terminal pickup for smooth unloading.
100% Authorized U.S. Factory Warranty
Official Factory-Authorized Dealer
Garage Equip Pro (garageequippro.shop) is an official factory-authorized U.S. dealer for Daytona Lifts. Every serial-numbered vehicle lift includes full manufacturer structural and hydraulic cylinder/power-unit warranty coverage plus lifetime U.S. technical support at contact@garageequippro.shop.

NO SALES TAX IN MOST STATES
No sales tax on most U.S. orders
DEDICATED SUPPORT
Daily assistance at contact@garageequippro.shop
LIFETIME SUPPORT
Peace of mind with lifetime U.S. lift support
800+ REVIEWS
Highly rated & shop-approved. View all!
Why Buy from Garage Equip Pro
Six reasons home garages and pro shops nationwide trust us with their lift purchases.
Authorized U.S. Dealer
Full manufacturer warranty on every order: AMGO, Katool, Triumph, Atlas, Tuxedo, Daytona, iDEAL, and Launch.
Best Price Guarantee
Find a lower advertised price from another authorized U.S. dealer? We'll match it, no questions asked.
0% APR Financing Available
Spread the cost over monthly installments without paying interest for qualified buyers at checkout.
Save 3% with Wire Transfer
Pay by bank wire or ACH transfer and we'll knock 3% off the order total. Most popular for lifts over $2,000.
Veterans, First Responders & Pro Shops
Special pricing for active duty, veterans, police, fire, EMS, and multi-lift commercial shop installations.
42+ Free Warehouse Pickups
Skip residential freight fees by picking up at one of our 42+ regional U.S. warehouse locations nationwide.
Still have questions? Talk to a real lift expert.
Contact Our Lift ExpertsWe're available every day from 8 AM to 8 PM ET. No-pressure advice, real expertise.